APRILIA CAPONORD Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 168

APRILIA CAPONORD Скачать руководство пользователя страница 60

AND ENGINE ON, A SPEED INDICATION OF A FEW km / h (mi) IN THE DIGITAL
DISPLAY.

SUCH BEHAVIOUR IS TO BE CONSIDERED NORMAL AND DOES NOT CREATE
MALFUNCTIONS IN THE SYSTEM.

IF THE GAP FOR ONE OR BOTH SENSORS IS NOT WITHIN THE TOLERANCE
INDICATED BELOW, TAKE THE MOTORCYCLE TO AN official Aprilia DEALER-
SHIP

Characteristic

Distance between tone wheel and front sensor

0.3 - 2.00 mm (0.012 - 0.079 in)

Distance between tone wheel and rear sensor

0.3 - 2.00 mm (0.012 - 0.079 in)

System ATC (Aprilia Traction Control)

ATC is a system that monitors and, if necessary, limits rear wheelspin under acceler-
ation to increase vehicle stability.

While ATC improves vehicle control, it does not allow the physical handling limits of
the vehicle to be exceeded. The rider is fully responsible for riding at a suitable speed
based on weather and road conditions, always leaving an appropriate safety margin.

Under no circumstances can ATC compensate for any rider error or improper use of
the throttle.

60

2 Vehicle

«
...
58
59
60
61
62
...
»

Содержание CAPONORD









































































































































































Отзывы:

Нет отзывов