APQS Freddie Скачать руководство пользователя

Страница: 73 / 101

9-1-2022

APQS.com

Machine Operation

Three-hole guide near the Tension Assembly

The three-hole thread guide near the tension assembly provides pre-tension to your thread and also helps

manage “thread twist” before your thread enters the tension disks on the tensioner.

Occasionally you should check the three-hole guide’s angle. It should point down to “8:00” if you imagine

the lower hole as the hands on a clock. This position also helps ensure the thread travels through the

tension disks correctly.

It’s okay to experiment with the thread path next to the tension assembly if your thread requires more pre-

tension, or if the thread appears to twist too much, causing tangling or looping around the needle. Images

above show some optional thread paths through the three-hole guide next to the tension assembly.

Be sure to use the bottom-most hole in the guide (illustrated with arrows above). This last hole ensures that

your thread stays deeply between the tension disks and does not slide in and out as you sew.

Pull the thread between the tension control disks and

over

the check spring as shown. Hold on to the

thread just before it enters the tension disks and pull on the remaining tail firmly to be sure the thread

is seated completely between the tension disks.

If your stitch quality appears to have changed, such as loops of thread on the quilt surface, this

is one of the first places to check. The thread must be completely seated between the two

tension disks for proper operation.

Tension Control Disks

Check Spring

Содержание Freddie






































































































Результаты поиска

Содержание Freddie

Отзывы:

Похожие инструкции для Freddie

Бренды по названию

Популярные бренды

APQS Freddie, Руководство по установке

Результаты поиска

Содержание Freddie

Отзывы:

Похожие инструкции для Freddie

Бренды по названию

Популярные бренды