APQS Freddie страница 5 Скачать руководство пользователя

Страница: 5 / 101

Millie – Millie 30 – Freddie Installation

9-1-2022

APQS.com

Assembly Preparation Tips

Even if you are not assembling the machine yourself, please read through the assembly instructions

thoroughly to better understand your machine.

Before assembling your machine, answer these questions:

Where will the machine be located, and how will it be oriented in the room?

It is important before you move the shipping boxes into your sewing room to identify where your longarm

will be placed. Consider where you want the “needle side” of your machine placed in relation to your space.

When facing the “needle side” of the machine, the left or right side of the table can rest next to a wall giving

you more space on the opposite side.

Before bringing in the long roller/rail boxes (shipping boxes 1 & 2), these boxes are heavy, and it is easiest to

open the boxes and move the rollers and rails separately (see page 10). The three rollers with canvas are

labeled on the right side of the roller, the left side of each roller has a threaded end. The roller with no

canvas is the Leveler Bar and is not labeled, be sure the threaded end of this bar is brought into your sewing

space with the threaded end going toward the left of your “needle side” of the table.

Be aware of your chosen orientation and which way the rollers need to be carried into your sewing space

(you may need to flip the rollers around in your room if they were brought in incorrectly and if you don’t

have room to flip them, you may need to take them to a space where they can be flipped around).

Pick-Up Roller

Leveler Bar (no label)

Quilt Top Roller

Backing Roller

Rollers are labeled on the

right side of each canvas.

These labels need to be

placed to the right of the

“needle side” of the

carriage.

The threaded end of each roller

is placed to the left side of your

table. The Leveler Bar does not

have canvas and is not labeled.

The carriage rails are also directional in that the flat side of

both rails should face each other when bringing them into

your sewing space. In other words, the C shape of the rails

should face outward.

Содержание Freddie






































































































Результаты поиска

Содержание Freddie

Отзывы:

Похожие инструкции для Freddie

Бренды по названию

Популярные бренды

APQS Freddie, Руководство по установке

Результаты поиска

Содержание Freddie

Отзывы:

Похожие инструкции для Freddie

Бренды по названию

Популярные бренды