41
<MEAS DISPLAY> Page
Step 2
Touch sampling [Rate] button or use cursor to move to sampling [Rate] button.
Step 3
The following sampling rate will be listed at right side of functional field
Function Button Function
100ms
It takes 100ms to sample all channels, is equivalent to 10 t/s.
200ms
It takes 200ms to sample all channels, is equivalent to 5 t/s.
500ms
It takes 500ms to sample all channels, is equivalent to 2 t/s.
1s
It takes 1s to sample all channels, is equivalent to 1 t/s, the best accuracy.
2s
It takes 2s to sample all channels, is equivalent to 0.5 t/s, the best accuracy.
TIP
Sampling rate on <MEAS DISPLAY> page is independently set and saved, it won’t affect sampling rate on
<DATA LOG> page.
8.3
Trigger
3 types of trigger are available for instrument: internal
,
manual and external trigger.
Internal trigger: instrument will make loop test according to the set sampling rate, current
test will cover previous data.
Manual trigger: instrument is controlled by
[
Trigger 1 time
]
button in trigger option, each
time instrument make test, current measured data will be saved on instrument display
screen.
External trigger: instrument is controlled by trigger input on Handler, each time handler
receives a rising edge signal, and instrument will make one measurement. This function is
usually used to connect with PLC and other equipment.