Diagnostics
Document No. D113-015
Page 52 of 77
Revision 1.9
Ethernet Cable Length
An estimate on the Ethernet cable length. (From the device to
switch or media converter.) The accuracy is approximately 5m. A
large discrepancy in this length may be indicative of an Ethernet
cable issue.
DIP Switch Position
The status of the DIP switches when the module booted.
Note that this status will not change if the DIP switches are altered
when the module is running.
Table 5.2 - Parameters displayed in the Status Monitoring – General Tab
The subsequent Status tabs depend on the configured protocol.
5.2.1.
E
THER
N
ET
/IP
S
TATUS
Figure 5.5 - EtherNet/IP Statistics
Statistic
Description
Class 1 Timeout Count
The number of Class 1 connections closed due to Timeouts.
Class 3 Timeout Count
The number of Class 3 connections closed due to Timeouts.
Class 1 Forward Open Count The number of Class 1 Forward Open (connection establishment) messages
sent.
Class 3 Forward Open Count The number of Class 3 Forward Open (connection establishment) messages
sent.
Class 1 Forward Close Count The number of Class 1 Forward Close (connection termination) messages sent.
Class 3 Forward Close Count The number of Class 3 Forward Close (connection termination) messages sent.
Class 1 Connection Count
The current number of active Class 1 connections.
Class 3 Connection Count
The current number of active Class 3 connections.
Table 5.3 - EtherNet/IP Statistics
