ANTTI 408050, Инструкция по установке и эксплуатации

Страница: 22 / 24

22
Scale
01-2020
Antti-Teollisuus Oy
Antti-Teollisuus Oy grants a guarantee on the products the company has manufactured, subject to the follow-
ing terms:
1. The guarantee lasts for one year, starting on the date of delivery from the factory; however,
it must include at least one harvesting season.
2. The guarantee covers defects in material and workmanship that are observed during the
guarantee period.
3. The guarantee period for the heat exchanger of the dryer heater is five years from the date
of delivery from the factory.
4. The instructions given by the manufacturer and the valid regulations have been
followed during assembly, operation and servicing.
5. The electrical installation may only be carried out by a duly authorised service company.
6. The manufacturer is not responsible for any possible guarantee or commitment that the
distributor may have granted.
Compensations under the guarantee
The guarantee covers the repair or replacement of the faulty parts, as deemed appropriate
by the manufacturer.
The guarantee covers neither the consequential losses
caused by the breakdown of the appliance nor the labour, travel or daily allowances, which
are incurred as a result of the replacement of the part.
The guarantee does not cover the assembly and adjustment of the machinery.
A prerequisite for validity of the product guarantee is that the control system and the
components used are approved by Antti-Teollisuus.
Restrictions
Compensation under the guarantee will not be remitted in the following cases:
1. If the cause of the fault is normal wear,
abnormal operating conditions, incorrect installation, inadequate servicing, carelessness or
unintended use.
2. The defect has resulted from incorrect voltage or any other disturbance in the electric
supply network.
3. The defect has resulted from thunderstorm, fire, flooding or any other external factor.
4. The defect has resulted from water or any other contamination in the fuel or from use of
fuel not suitable for the burner.
5 If the user has modified the appliance or attached additional equipment to it
without the consent of the manufacturer, or if the pre-set fixed values of the
limiting devices have been changed.
Claiming for compensation
1. The manufacturer and distributor must be notified of the defect in writing without delay.
2. The make, type and serial number as well as the date of delivery/putting into operation of
the machine must be advised.
3. Upon request, the faulty part or appliance must be delivered to the guarantor without delay.
If the part is not returned, the guarantor is entitled to invoice for the replacement part.
GUARANTEE TERMS