ANTTI 408050, Инструкция по установке и эксплуатации

Страница: 17 / 24

17
Antti-Teollisuus Oy
Scale
01-2020
PROGRAMMING MENU 2 - SETTING THE "RESET" FUNCTION
Under next programming menu (2-FNC) we programme the reset function for the RST key
to facilitate taring of the load at any given time.
Depress once the PAR key on the scale. While "PRO" is shown on the display, press the
F1^ button repeatedly until 2-FBC is shown on the display. Move forward in the menu by
depressing the PAR key and depress the F1^ key to change the settings.
Press Param-
eter
Value
or sta-
tus
Description
Pro No
Moving to programming mode (
PRO
) or
returning to start mode (
NO
)
2X
Pro 2-fNC
Select the menu for assisting functions
(
2-fNC
)
usr-1 NO
Function of 1st user input, no changes
usr-2 NO
Function of 2nd user input, no changes
usr-3 NO
Function of 3rd user input, no changes
f1 NO
Function on 1st function key, no changes
F2 NO
Function on 2nd function key, no chang-
es
17X
F2 Print
Print (
print
) function is selected for the
function key 2.*
rst NO
Operation of the Reset-key Go to point
(
rst
) in the menu. (no, rel, d-rel, bat, r-tot,
r-hi, r-lo, r-hl, d-lev)
rst reL
Select the operation (
reL
) for the Reset-
button for taring the scale
with button
Sc-F1 NO
Additional operation for 1st function key,
no changes
Sc-F2 NO
Additional operation for 2nd function key,
no changes
Pro NO
Moving to programming mode (
PRO
) or
returning to start mode (
NO
)
EnD
Exiting the programming mode
*Only, if a printer is connected to the serial communication port on the scale
terminal.