ANTEK AIR MAGNA 150, Инструкция по установке и обслуживанию

Страница: 34 / 53

34
AIR MAGNA 150
GREEN ENERGY SYSTEMS
The HEAT STOP function stops all production av radiator heat when the outside air temperature is equal to or
higher than the value entered for heat stop. When the heat stop function is activated, the circulation pump will
be turned off except when warm water is being produced. Even if shut off, the pump will be ”exercised” during 1
minute a day. Factory setting for heat stop is 17°C.
If you wish to change the HEAT STOP value:
1 Open the main menu INFORMATION by pressing the right- or left-hand button once.
You will find the cursor at the sub-menu OPERATION
2 Press the ”down” button to move the cursor to the sub-menu HEAT CURVE
3 Open the selected menu by pressing the right-hand button once.
4 You will find the cursor at the parameter CURVE.
5 Press the ”down” button to move the cursor to HEAT STOP
6 Open the selected parameter by pressing the right-hand button once. The cursor moves to HEAT STOP
7 Raise or lower the value, using respectively the ”up” or ”down” button.
8 Press the left-hand button three times to return to the main menu.
CONTROL
Adjuatmanet of the HEAT STOP value