ANTEK AIR MAGNA 150, Инструкция по установке и обслуживанию

Страница: 12 / 53

12
AIR MAGNA 150
GREEN ENERGY SYSTEMS
3. Tighten the core of the liquid valve (the smaller one) with valve key at first . After about 20 seconds, tighten
the core of the gas (the bigger one) with valve key. Turn off the machine at once and cut off the power supply.
4. Tighten the cap of two valves.
5. Disconnect the power cable from outdoor unit.
6. Loose the nut of the connect pipe to the outdoor unit valve with 2 spanner, disconnect the connect pipe and
the two valves.
· If the Outdoor Unit needs to be disconnected and moved to another place, please recycle the gas back into the
compressor according to the following steps before doing the disconnecting:
1. Start the machine, operate heat pump on state.
2. Remove the cap of two valves with the spanner.
PIPE CONNECTIONS
The step and diagram of collect refrigerant
Gas valve
Liquid valve
Gas valve
Liquid valve
Gas valve
Liquid valve
Gas valve
Liquid valve
Valve key
Valve key