ANTEK AIR MAGNA 150, Инструкция по установке и обслуживанию

Страница: 25 / 53

25
CONTROL
Main Menu Information
Sub-Menu OPERATION
This menu is used for the selection of operating mode. The control system allows for five different operating modes:
· OPERATION HEAT PUMP ON :
Heat pump (compressor) operation is allowed by the control system.
· OPERATION HEAT PUMP OFF:
Heat pump (compressor) operation is not allowed by the control system.
· OPERATION ADD. HEAT ON/OFF:
The auxiliary heater will/will not be allow ed to operate. This operating mode is normally used when a
new installation is being put into service, before the brine system is ready for use.
· OPERATION AUTO :
Heat pump and auxiliary heater are regulated automatically by the control system. The text “OPERATION
AUTO” will be displayed on the control panel.
· OPERATION ROOMHEAT :
The heat pump will be distributed to the heating system only; The heat pump will not produce warm
water. The text “OPERATION WARMWATER” will be displayed on the control panel.
· OPERATION WARMWATER :
The heat pump will only produce warm water; no heat will be istributed to the heating system. The text
”OPERATION WARMWATER “will be displayed on the control panel.
To select the desired sub-menu use the up or down button. Open the menu by pressing the right-hand button once.
To return to the main menu, press the left-hand button once
To open the main menu INFORMATION, press the right- or left-hand button once.
Return
Open
next
menu
sub
menus