ANTEK AIR MAGNA 150, Инструкция по установке и обслуживанию

Страница: 10 / 53

10
AIR MAGNA 150
GREEN ENERGY SYSTEMS
PIPE CONNECTIONS
Pipe connections (heating medium)
Pipe connections for the heat medium side are made at the top. All required safety devices, shut-off valves (as close to
the heat pump as possible), and particle filter (supplied) are fitted.
When connecting to a system with thermostats on all radiators, a relief valve must be fitted, or some of the thermostats
must be removed to ensure sufficient flow.
Pipe connections (water heater)
The heat pump´s water heater must be fitted with the necessary valve equipment.
The heat pump should be supplemented with an electric water heater if a bubble pool or other significant consumer
of hot water is installed. The valve coupling in COMPACT (electrical water heater) can be divided. The mixing valve stays
in COMPACT and the remaining valve coupling can be used for incoming cold water in AIR MAGNA 150.
NOTE! The venting valve should be set on the top of the heating medium system.
VENTING VALVE