Ansmann Racing xBase 2.0 Deluxe, Инструкция по эксплуатации

Страница: 7 / 36

Digital Balance Charger xBase 2.0 Deluxe
7
5.3.1 Start to charge/discharge: after set up the mode menu correctly,
press “Enter/Start” key for more than 2 seconds to start the process.
Picture B
This screen shows the number of cells you set up and the processor
detects.“R“ shows the number of cells found by the charger and “S“
is the number of cells selected by you at the previous menu.
If both number are identical you can start charging by pressing the
“Enter/Start” button. If not, press the “Mode/Esc” button to
go back to the previous menu, then carefully check the number
of cells of the battery pack to charge again. If you had selected
the AUTO mode or discharge mode, you can pass over this
screen directly.
This screen shows the present situation during charging
process. To stop the charging, press “Modus/Esc“ key once;
As you can see in the sketch on left.
①
for the cell count
②
for the operating mode •CHG = charging at auto mode
• BAL = balance charging mode • FAS = fast charging
• STO = storage mode • DSC = discharge mode
③ elapsed time
④
charge/discharge current
⑤
charge/discharge voltage of battery
⑥
capacity of charge/discharge.
Connection diagram in the
Auto charging mode
Connection diagram
in the balance charging
/storage/discharge mode
Individual cell
connection diagram