Ansmann Racing xBase 2.0 Deluxe, Инструкция по эксплуатации

Страница: 2 / 36

Instruction Manual 2
Intelligent Digital Balance Charger
xBase 2.0 Deluxe
Instruction Manual
1. Special features ................................................2
2. Performance parameter ......................................2
3. Exterior and accessories ......................................3
4. Key features
.....................................................3
5. Operating instructions ........................................3
6. Warning and error messages .............................. 11
7. Safety messages ............................................. 12
8. After-sale service and guarantee.......................... 12
1.1 This charger employs an advanced charging calculation and
design, which allow multilayer error to be compatible.It can
create a safe charging condition and maximum reduce the
danger caused by negligence or setting error of user.
1.2 This item adopt prevalent synchronous buck & boost converter
technology ,this makes conversion efficiency up to 90%.
1.3 Accept all types of R/C batteries:
Lipo, LiIo, LiFe, NiMH, NiCd, Pb.
1.4 Simple and efficient user interface makes operation easy, with
powerful function and abundant content. Real-time shows you
the battery voltage, charge current, temperature of batteries,
capacity of charge/discharge, elapsed time, input voltage etc.
Therefore, you can inquire the present state and establish
various safety-limited parameters conveniently.
1.5 This charger uses an individual-cell-voltage balancer to
maintain your pack in balance while charging/discharging.
During the process,it can monitor and balance each cell of the
pack individually (Tolerance ± 0.01 V).
1.6 Accepts individual battery charging/discharging, so you can
extend the scope of application of the charger. That is equally
useful for the DIY battery.
1.7 Various of charging modes to meet different demands:
charging-auto/balance charging/fast charging/storage and
cyclic charging etc.
1.8 For users convenience it can store and load maximum five
data of different batteries. You can establish the data contains
program setting of the battery to charge or discharge
continually. These data can be called out at any time you need
and the process can be executed without program setting.
1.9 Perform 1 - 5 cycles of charge>discharge or discharge>charge
continually for NiMH/NiCd refreshing.
2.1 Input voltage range DC: 11∼18.0 V
AC: 100∼240 V
2.2 Charge current range 0.1∼6.0 A
2.3 Discharge current range 0.1∼2.0 A
2.4 Charge power limited max.80 W
2.5 Discharge power limited max.10 W
2.6 Balance current max. 300 mA
2.7 Balance tol0.01 V
2.8 NiCd/NiMH battery cell count 1∼18 cells
2.9 Lithium battery types Lipo, Li-ion,LiFe
2.10 Lithium battery cell count 1 - 6 series
2.11 Pb battery voltage 2 - 24 V
2.12 Weight 640 g
2.13 Dimensions 145 x 145 x 56 mm
1.10 You can connect a high-precision digital temperature sensor to
protect the charger works in a safety temperature.
Once a battery reaches the maximum temperature you set
during charge/discharge, the process will be terminated to
protect the battery. This is very important for NiMH/NiCd
(separately purchased temperature sensor).
1.11 For technical experts, this charger offers a PC based program,
that can analyse the characteristics of the battery by USB port.
It shows a graph of voltage, current, capacity and temperature
curves. And it also shows the individual voltage of each cell in
the Lithium battery pack.
*Separately purchased program kit.
1. Special features 2. Performance
parameter
Content