manualshive.com logo in svg

Anritsu MT8850A, Руководство по эксплуатации, Страница: 93 / 156

Поделиться
Скачать
Anritsu MT8850A Скачать руководство пользователя страница 93

Using the Script Menu

MT8850A / MT8852A Bluetooth Test Set

13000-000109

8-33

 January 2003

Testing in Standard Script Mode

You can select or deselect the test to run and make changes to the frequency values
shown.

10.  To select or deselect a test, choose the test and press the 

 key.

11.  To change a frequency, choose the frequency, press the 

 key, enter the value

using the keypad and press the 

[Enter] 

soft key.

12. Press 

the 

[Defaults] 

soft key to restore the default values.

13. Press 

the 

[Limits]

 soft key to display the Maximum input power test limits screen.

Note:

The Bluetooth specification does not detail the FER value, so the customer can
set a percentage pass level to meet their own requirements.

14. Press 

the 

[Defaults] 

soft key to restore the default values.

15.  Choose the limit you want to change.

16. Press 

the 

 key and enter the new limit using the keypad.

17. Press 

the 

[Enter]

 soft key.

18. Press 

the 

[Conditions]

 soft key to return to the test conditions screen.

19. Press 

the 

 key to return to the Script menu.

Содержание MT8850A





























































































































































Отзывы:

Нет отзывов