Anritsu MT8850A Скачать руководство пользователя страница 64

Страница: 64 / 156

MT8850A / MT8852A Bluetooth Test Set

Using the Script Menu

8-4

13000-000109

Changing the Password

January 2003

To lock/unlock the script:

Choose the script, press the

[Lock]

[Unlock]

soft key.

You may need to enter a password. If you have not changed the
password, the factory default is 1234.

Enter the password using the keypad.

7. Press

the

[Enter]

soft key.

Changing the Password

To change the password:

Choose the script, press the

[Edit Passwd]

soft key.

The Script password screen is displayed.

Enter the current password using the keypad. If a mistake is made, press the

key to delete the character at the cursor and move the cursor one place to

the left.

The factory default password is 1234.

3. Press

the

[Enter]

soft key.

Enter the new four-digit password and. press the

[Enter]

soft key

Confirm the new password and press the

[Enter]

soft key again to save the

password.

Содержание MT8850A





























































































































































Результаты поиска

Содержание MT8850A

Отзывы:

Anritsu MT8850A, Руководство по эксплуатации, Страница: 64 / 156

Результаты поиска

Содержание MT8850A

Отзывы: