manualshive.com logo in svg

Anritsu MT8850A, Руководство по эксплуатации, Страница: 44 / 156

Поделиться
Скачать
Anritsu MT8850A Скачать руководство пользователя страница 44

MT8850A / MT8852A Bluetooth Test Set

Configuring the MT8850A/MT8852A

7-4

13000-000109

Setting up the EUT

 January 2003

Viewing Supported Features

Bluetooth equipment can support a number of optional features defined in the Bluetooth
specification.

1. Press 

the 

 hard key.

2. 

Choose “Equipment Under Test (EUT)”.

3. Press 

the 

 key.

4. 

Choose “View supported features”.

5. Press 

the 

 key.

6. 

If the MT8850A/MT8852A is already in a link with the EUT, this screen will
immediately display the EUT supported features screens.

7. 

A filled-in ellipse indicates supported features. Unsupported features show an empty
ellipse. In the screens above, for example, Encryption is not supported and Power
control is supported for the equipment under test.

8. Press 

the 

[1 of 2]

 soft key to move to the second screen or the 

[2 of 2]

 soft key to

move back to the first screen.

9. Press 

the 

 key to exit this screen.

Содержание MT8850A





























































































































































Отзывы:

Нет отзывов