Anritsu MT8850A, Руководство по эксплуатации, Страница: 21 / 156

Installation MT8850A / MT8852A Bluetooth Test Set
13000-000109 3-3
January 2003 Rack Mounting
Kits Parts List
D41473 Rack mount, support bracket 1.0
49361 Bracket support, base panel 1.0
MT8852A MT8850A/MT8852A fitted with
universal top and bottom covers
with removable feet. 1.0
Tools Required
1 Small Phillips screw driver
1 Large Phillips screw driver
1 Small Phillips torque screwdriver 0 cNm to 50 cNm.
1 Torque socket driver 0 cNm to 200 cNm.
1-Foot removal tool (supplied).
1 Assembly drawing “MT8852A/01 Rack Mounted left or right option”
Assembly Procedure
1. Remove all feet from the MT8850A/MT8852A using the tools supplied. See
diagram and notes on the following pages.
2. Confirm the correct tools are available, the parts listed above are present
and the assembly drawing is at hand.
3. Lay the large support bracket D41473 next to the MT8850A/MT8852A
Bluetooth Test Set as per the assembly drawing. Note if the instrument
needs to be mounted on the left side of the rack, simply lay the bracket on
the right side. i.e. a mirror image of the assembly drawing.
4. Locate the support bracket on to the four case pillars. Secure with 4 screws
905-68 and 4 washers 900-345. See max. torque setting above. Note leave
the two rear screws lose to allow alignment, location, and securing of the 6
base plate snap rivets 788-575.
5. Locate the front rack mounting bracket C37276 at the front of the
instrument on the other side to the large support bracket with two screws
905-68 and two washers 900-345. See max. torque setting above.
6. Locate the rear rack bracket C41449 at the back of the instrument on the
other side to the large support bracket with two screws 905-68 and two
washers 900-345. See max. torque setting above.
7. Fit the front face plate 50077 with 2 kep nuts 900-848. See max. torque
setting above.
8. Position the base panel 49361 as shown in the drawing, and secure with 6
snap rivets 788-575.