Anritsu MT8850A, Руководство по эксплуатации, Страница: 37 / 156

Getting Started MT8850A / MT8852A Bluetooth Test Set
13000-000109 6-3
January 2003 Running a Single Test
Press the key, enter the number of the script that you want to run from the
keypad and press the [Enter] soft key.
or:
Press the
[List] soft key and move the cursor to the test script that you want to run and
press the key.
3. Move the cursor back into the measurement area of the screen.
4. Press the [EUT addr] soft key and select either manual, inquiry, RS232, or USB
(MT8852A only).
5. Choose the test that you want to run.
6. Press the [Single] soft key.
The relevant results screen for the test is displayed.
From this screen you can set up the test and save this setup information to be used for
future tests.
7. Press the [Setup] soft key to go the setup screen for the chosen test.
Scripts 1 and 2 are predefined and cannot be altered.
8. Press the [Save] soft key to save the setup information.
9. Press the hard key to run the test once or:
Press the hard key to run the test script according to the configuration
settings of the MT8850A/MT8852A.
Press the [ Abort ] soft key to terminate the script immediately. Press the
hard key again to stop continuous script running.
10. The test results are displayed.