manualshive.com logo in svg

Anritsu MT8850A, Руководство по эксплуатации, Страница: 85 / 156

Поделиться
Скачать
Anritsu MT8850A Скачать руководство пользователя страница 85

Using the Script Menu

MT8850A / MT8852A Bluetooth Test Set

13000-000109

8-25

 January 2003

Testing in Standard Script Mode

20. Press 

the 

[2 of 3]

 soft key to move to the third screen.

You can select or deselect the test to run and make changes to the frequency values
shown.

21.  To select or deselect a test, choose the test and press the 

 key.

22.  To change a frequency, choose the frequency, press the 

 key, enter the value

using the keypad and press the 

[Enter] 

soft key.

23. Press 

the 

[Defaults] 

soft key to restore the default values.

24. Press 

the 

[Limits]

 soft key to display the Single sensitivity test limits screen.

Note:

As there is no RF Bluetooth specification for FER, the MT8850A/MT8852A
defaults to a FER limit of 100%.

25. Press 

the 

[Defaults] 

soft key to restore the default values.

26.  Choose the limit you want to change.

27. Press 

the 

 key and enter the new limit using the keypad.

28. Press 

the 

[Enter]

 soft key.

29. Press 

the 

[Conditions]

 soft key to return to the test conditions screen.

30. Press 

the 

 key to return to the Script menu.

Содержание MT8850A





























































































































































Отзывы:

Нет отзывов