Anritsu MT8850A, Руководство по эксплуатации, Страница: 81 / 156

Using the Script Menu MT8850A / MT8852A Bluetooth Test Set
13000-000109 8-21
January 2003 Testing in Standard Script Mode
1. Choose “Carrier drift” from the Script menu.
2. Press the key to select or deselect this test from the script routine.
If a test is selected, the box will be filled in. If not selected the box will be hollow.
3. Press the [Setup] soft key.
The Carrier drift test conditions screens are displayed.
This screen lets you enter the number of packets to send, switch hopping on or off. If
hopping is on you can change the mode. You are also able to set the length of the
packets and change the test type.
4. Choose “Number of packets”.
5. Enter the number of packets using the keypad.
6. Choose “Hopping”.
7. Press the key to switch between ON, OFF or ON & OFF. If you choose ON,
choose Hopping test mode and press the key to switch between All and Any.
8. Choose “Packet type (DHx)”.
9. Press the key to switch between:
•
1
•
3
•
5
•
1&3
•
1&5
•
3&5
•
1,3&5
10. Choose “Test type”.
11. Press the key to switch between Loopback and TX.