manualshive.com logo in svg

Anritsu MT8850A, Руководство по эксплуатации, Страница: 63 / 156

Поделиться
Скачать
Anritsu MT8850A Скачать руководство пользователя страница 63

Using the Script Menu

MT8850A / MT8852A Bluetooth Test Set

13000-000109

8-3

 January 2003

Locking and Unlocking a Script

Locking and Unlocking a Script

You can access any of the 10 scripts in order to edit the script name, lock/unlock a script
(scripts 3 to 9 only) and set or change the access password.

1. Press 

the 

 hard key.

The Script menu is displayed.

2. 

Move the cursor to the Script number.

The soft keys change to 

[List]

 and 

[Setup]

. 

[List]

 will display a list of scripts and

[Setup]

 will take you to the Path Loss table for script named (see page 8-6).

3. Press 

the 

[List]

 soft key.

The Script list screens are displayed.

4. 

To change the name of a script:

 Choose the script, press the 

[Edit]

 soft key and

enter a name from the keypad. Press the 

[Enter]

 soft key.

The Edit key is only available if the script is unlocked.

Содержание MT8850A





























































































































































Отзывы:

Нет отзывов