Anritsu MT8850A Скачать руководство пользователя страница 111

Страница: 111 / 156

Using the Script Menu

MT8850A / MT8852A Bluetooth Test Set

13000-000109

8-51

January 2003

Viewing Test Results

Maximum Input Power Test Results

Standard mode

Choose “Max input power” from the Script menu.

2. Press

the

[Results]

soft key.

The Maximum input power results screen is displayed.

3. Press

the

[1 of 3]

soft key to move to the second screen.

4. Press

the

[2 of 3]

soft key to move to the third screen.

Definition of test results

Current BER

Displays the BER as measured in the last 10 returned packets.

Overall BER

Displays the BER for all the returned packets.

Current FER

Displays the FER as measured in the last 10 returned packets.

Overall FER

Displays the FER for all the returned packets.

FER due to
CRC

Displays the number of packets returned that had a CRC error. These
packets are used in BER calculations.

Содержание MT8850A





























































































































































Результаты поиска

Содержание MT8850A

Отзывы:

Anritsu MT8850A, Руководство по эксплуатации, Страница: 111 / 156

Результаты поиска

Содержание MT8850A

Отзывы: