Anritsu Mainframe MU909060A Series, Руководство по эксплуатации, Страница: 155 / 190

4.3 Result
4-7
4
A
pplicat
ion Reflector
4.3 Result
The Result screen is blank when no test has been run, but starts
displaying results as soon as the test is started by pressing the Start key
(section 1.1.2). To disable the Reflector application, press the Start key
again.
After starting the test, the Network Master switches automatically to the
Result screen if it is not already displayed.
Note
1. The Network Master only reflects traffic while a test is running.
2. An icon on the top bar indicates that the Reflector
application is enabled.
4.3.1 Reflector
When the Result screen is opened, the default screen is the Reflector
screen (Figure 4.3.1-1) and displays an overview of current traffic
conditions. This screen is refreshed every 1 s until the Reflector test is
stopped.
Figure 4.3.1-1 Result overview Screen
[1] This is the overview of incoming traffic. Use the Statistics tab for
more detailed information.
[2] This is the overview of outgoing (reflected) traffic. The Reflector only
reflects unicast traffic.
1
2