Anritsu Mainframe MU909060A Series, Руководство по эксплуатации, Страница: 147 / 190

3.8 RFC2544 Tests
3-59
RFC2544 Burst:
3
Ether
n
et Applicat
ion
Figure 3.8.4-3 RFC2544 Burst Results Screen, Switch Router Test
Mode
Item Description
Tx Burst Size
Transmitter burst size
Rx Frame Loss Min Minimum frame loss for step
Rx Frame Loss Max
Maximum frame loss for step
Rx Frame Loss Avg Average frame loss for step
When Accumulate repeated steps is enabled, steps with the same Frame
Size and Line Load are accumulated, meaning Min/Max/Avg is measured
over all repetitions for a step.
To change the Tx port and corresponding Rx port, press the F3 soft key.
Note
The Tx and Rx ports vary with test mode and port relations. In the
Switch Router Test mode, Port A transmits to Port B and
vice
versa. The Tx and Rx ports are then Tx (Port A) with Rx (Port B)
and Tx (Port B) with Rx (Port A).
When testing in the End to End Network Test mode, a new soft key
labeled Results is displayed to change between local and remote results
by pressing the F2 soft key.