- 2 -
C1
39
60
36
00
_1
.fm
IT
AUS
DE
FR
ES
To find the specific topics of interest to you quickly, re-
fer to the index at the start of the manual.
This manual is subdivided into two parts.
1
st
part
: contains all information necessary for
general readers, i.e. for users of the appliance.
2
nd
part
: contains all the information necessary
for special categories of reader, i.e. all skilled op-
erators authorised to handle, transport, install,
service, repair and scrap the appliance.
While users are instructed to refer to the 1
st
part only, the
2
nd
part is addressed to skilled operators. They may also
read the 1
st
part for a more complete picture of the infor-
mation provided if necessary.
The constructor has produced this manual, which forms
an integral part of the appliance, to provide the neces-
sary information for those authorised to interact with it
during its working life.
As well as adopting good practices for use, the man-
ual's intended readers must read it thoroughly and
apply its instructions to the letter. The constructor
supplies this information in its own language (Ital-
ian), but it may be translated into other languages to
meet legal and/or commercial requirements. A little
time taken to read this information will allow the pre-
vention of risks to health and safety, and the risk of eco-
nomic losses.
Keep this manual in a clearly identified safe place through-
out the working life of the appliance, so that it will always be
available when required for consultation.
The constructor reserves the right to make changes
without any obligation to provide any prior notice.
A number of symbols have been used to highlight partic-
ularly important parts of the text or important specifica-
tions. Their meaning is as defined below.
Caution - warning
Indicates that suitable procedures must be
adopted to avoid putting people's health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical in-
formation which must not be overlooked.
The nameplate shown here is fitted directly to the ap-
pliance.
It contains references and all essential information for
operating safety.
1)
Gas data
1a)
Gas type
1b)
Test gas pressure
1c)
Nominal gas consumption
2)
Model
3)
Personalization
INFORMATION FOR THE READER
0
GENERAL INFORMATION
1
PURPOSE OF THE MANUAL
CONSTRUCTOR AND APPLIANCE IDENTIFICATION
Targa aus gas.tif