C1
39
60
36
00
_1
.fm
- 9 -
IT
AUS
DE
FR
ES
To carry out this operation, proceed as follows.
1- Switch the appliance off and leave it to cool.
2 - Use a scraper tool to remove cooking residues
from the plate.
3 - Spread a suitable degreaser on the plate and
leave it to act for a few minutes.
4 - Clean the plate thoroughly with a sponge, rinse
with plenty of water and dry.
Important
Rinse the cooking plate thoroughly to re-
move all residues of the degreasing deter-
gent, and prevent stains and marks from
forming when the plate is put back into use.
To carry out this operation, proceed as follows.
1- Remove the bottom plate (
C
) and the grid (
D
) from
the oven and clean them thoroughly.
2 - Clean the inside parts of the oven to remove any
deposits which may impair its operation.
3 - Dry the surfaces and reassemble the compo-
nents.
To carry out this operation, proceed as follows.
1- Turn off the gas supply tap.
2 - Pull off the knob (
A
).
3 - Undo the screws (
B
) and remove the control pan-
el (
C
).
4 - Undo the screw (
D
) of the pressure connection.
5 - Connect the pressure
gauge (
E
) to the pressure
test point.
6 - Turn the gas supply tap
back on.
7 - Light the burner and turn
the knob to the full flame
setting (see page 6), then
check that the pressure
reading complies with the
values in the table (see
back of manual).
8 - Turn off the burner, disconnect the pressure gauge
and restore the initial conditions after completing
the operation.
CLEANING THE PLATE
CLEANING OVEN
CHECKING GAS PRESSURE
IDM-39603617700.tif
D
A
IDM-39603617800.tif
C
B
E
D
C
IDM-39603617600.tif