Anest Iwata MSU-113 N, Руководство по эксплуатации и обслуживанию, Страница: 19 / 44

5. USE
19
5.1 Use
This section describes the multi spray unit use in compliance with the safety standards in force. We
recommend reading it carefully.
LIMITS AND CONDITIONS OF USE
Any change of the unit can be carried out only if authorised by ANEST IWATA EUROPE technical
service. If the change is not authorised, the unit is not considered as ATEX approved.
Environmental condition
Environment temperature: min. +5°C; max. +40°C
The plate data concerning the maximum surface temperatures, refer to measurements carried out in
normal environmental conditions and installation.
Even minimum changes of these conditions can have remarkable effects on the heat development.
5.2 Safety rules during use
TO USE the multi spray unit COMPLY WITH the safety precautions and rules described below.
The manufacturing company declines all responsibility if the operator does not comply with them. It is
not to be held responsible for any carelessness during the pump use, either.
If the system is used improperly, it could be broken causing serious damage.
- Use the multi spray unit for professional purposes only.
- Do not change the system; use only Anest Iwata original spare parts.
- Check the system daily: repair or replace immediately all worn or damaged parts.
- Never exceed the maximum working pressure: 6.8 bar (0.68 MPa).
- IT IS FORBIDDEN to use the equipment for purposes that are different from the ones it is
destined to which are described in the use and maintenance manual. If in doubt, apply to
your Anest Iwata reseller.
- Use paints and solvents compatible with the system parts they come into contact with.
- Refer to the paint and solvent features mentioned by the manufacturer.
- Wear the protective clothes described in section 5.3.
- Comply with all the local standards on electric safety and fire risks.
5.3 Clothes
Wear protective gloves and goggles, an oxygen mask and ear protection during operation. Always
follow the laws in force (Ex. ITALIAN LAW 626/94).