Anest Iwata MSU-113 N, Руководство по эксплуатации и обслуживанию, Страница: 15 / 44

4.1 Check the purchased product
Before using the pump, make sure it has not been damaged during transport or storage.
Also check that all standard components are inside the packaging.
4.2 Conditions for the installation
- The installer must know the ATEX classification of the installation area and also the risks deriving
from a potentially explosive atmosphere, especially explosion and fire, so that he can adopt the suit-
able protection measures.
- All maintenance operations, assembly and disassembly, must be performed out of the explosion-risk
area and by specialised staff.
- Check that all the accessories comply with the essential safety requirements of the ATEX Directives.
We recommend handling them carefully in order not to modify the features.
- Clean the unit once the installation has been completed.
- To connect the multi spray unit and the gun use the antistatic-type pipeline.
The equipment must be installed by a specialized and authorized staff.
In any case, follow the instructions below.
Painting must preferably take place inside a suitable spray booth equipped with suction device.
Do not use the unit if the suction device is off.
WARNING
IF PAINTING IS CARRIED OUT OUTSIDE THE SPRAY BOOTH, ALWAYS OPERATE IN A PLACE
WITH THE RIGHT VENTILATION TO AVOID THE CONCENTRATION OF INFLAMMABLE VAPOURS
COMING FROM SOLVENTS OR PAINTS.
4.3 Installation
[ref. figure 2 page 17 and figure 3 page 18]
- Place the equipment on the floor, on a horizontal surface.
- Connect the suction hose (A) and the product recirculation hose (B)
- Connect the twin pipe for air and paint to compensating filter and air regulator.
- Earth the free end of the earthing cable.
- Connect the Multi Spray gun to the other end of the air/paint twin pipe
- Connect the air supply pipe to the installation.
15
4. INSTALLATION AND START