Anest Iwata MSU-113 N, Руководство по эксплуатации и обслуживанию, Страница: 13 / 44

13
Safety
Some pictograms showing the safety warnings to be followed by anyone who is going to use it can
pictograms
be found on the pump.
WARNING
THE MANUFACTURER IS NOT TO BE HELD RESPONSIBLE FOR DAMAGE OR ACCIDENTS TO
PEOPLE OR THINGS DUE TO NON-COMPLIANCE WITH THE PRESCRIBED RULES. THE
OPERATOR IS THE ONLY PERSON RESPONSIBLE.
2.5 Workable products
MULTI SPRAY ANEST IWATA pumps are conceived to paint ferrous material, wood and plastic.
Model MSU 113 N is used for solvent-based paints and water based pains with low or average
viscosity.
To use the equipment with special products ask for the approval of the manufacturer. Moreover, the
technical features of the unit must be adapted for processing such products. ANEST IWATA is not
responsible for any accident due to NON-AUTHORISED and non-qualified personnel using the pump
for purposes that are different from the above-mentioned ones.
WARNING
DO NOT USE:
- ANY HALOGENATED HYDROCARBON SOLVENTS, SUCH AS TRICHLORETHANE, METHYLENE
CHLORIDE OR ANYTHING SIMILAR:
- ANY FLAMMABLE OR VERY TOXIC PRODUCTS SUCH AS PETROL, KEROSENE INFLAMMABLE
SOLVENTS OR COMBUSTIBLE GASES.
- ANY HERBICIDE OR PESTICIDE
- ANY RADIOACTIVE FLUID