andrews LWH42 Скачать руководство пользователя

Страница: 37 / 64

Prohibited

WARNING

Icons warning of risk level:

CAUTION

This symbol warns of hazards which have the immediate poten-
tial to result in severe or lethal personal injury or fire.

Denotes content that may result in personal injury or
property damage if ignored.

• To operate the water heater properly and safely, comply with this installa-

tion manual and the installation manuals of any other equipment.

• The flue terminal must be installed in accordance with regulation in force.

Directions for Installers

WARNING

• The flue terminal must be installed in accordance with the rules in force.

• Failures and damage caused by erroneous work or work not as instructed in this manual are not

covered by the warranty.

Be sure
to do

Flue Terminal

Q’ty

Part

Shape

Q’ty

Part

Shape

Tapping Screw

Sleeve

Wing Nut

Packing (only for products

for wall thicknesses of

370 mm to 690 mm)

Rounded Wood Screw

Wall Anchor

15-2. Flue Terminal Installation Manual

FF-100A-200
FF-100A-400
FF-100A-700

Model Numbers:

15-2-1. Included Accessories

The following accessories are included with the unit. Check for any missing
items before starting installation. (They are all attached to the product body.)

(L)WH42̲56(33̲38)̲E

05.10.4, 1:41 PM

Содержание LWH42

































































Результаты поиска

Содержание LWH42

Отзывы:

Похожие инструкции для LWH42

Бренды по названию

Популярные бренды

andrews LWH42, Руководство по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание LWH42

Отзывы:

Похожие инструкции для LWH42

Бренды по названию

Популярные бренды