AND Explosion Protected Weighing Indicator AD-4403-FP ST Series, Инструкция по эксплуатации

Страница: 77 / 112

9-4
Display Check Item
“Chc Out” Control output (Terminal #10 to #19)
Turns on a terminal #10 to #19 in this order and displays a relevant terminal-number as shown below.
(This check is performed automatically.)
*
Ignore these displays, “J11 6” , “J11 4” , “J11 2” . They are for factory use.
* To return to the check item-selecting mode, press [ESC].
Terminal # Display
10 “tb1-10 1”
11 “tb1-11 2”
14 “tb1-14 3”
15 “tb1-15 4”
18 “tb1-18 5”
19 “tb1-19 6”
“Chc rS” RS-232C/422/485
Pressing [ENTER] sends 123<CR><LF>(ASCII code) at the condition configured in its function,
rSF-03, rSF-04, rSF-05, or rSF-06 and checks if the same data is returned.
An installed option name is displayed on the sub display. In case of OP-03 (RS-422/485), press
[F] to see either “485” or “422” setting.
* To return to the check item-selecting mode, press [ESC].
Result of check Display
Good condition “PASS”
Something wrong No change on display
“Chc An” Analog output
Apply a current in the range of 2mA to 22mA with [FUNC.] (Increase) and [F] (Decrease) and see if the
current value is displayed.
*
To return to the check item-selecting mode, press [ESC].
9-2 Clearing “Zero” and “Tare”
To clear the Zero and Tare stored in the memory, turn on the power while pressing [TARE].