AND Explosion Protected Weighing Indicator AD-4403-FP ST Series, Инструкция по эксплуатации

Страница: 13 / 112

1-6
Type B for the check-weighing mode.
# Name Description
[1] [ZERO]
Returns the display to the center of zero. The range of zero can be set at
CALF-05. See { Appendix C: Function List}
[7] Works as a numerical key, 7, used for settings.
[2]
[ANF]
Enters the analog output (OP-07) mode.
See {8-4 Option-07:Analog Output}
[3] [TARE]
Subtracts the tare. When gross weight is “0”, it clears tare.
The tare subtraction condition can be set with CALF-10 and 11.
See {Appendix C: Function List}
[8] Works as a numerical key, 8, used for settings.
[4]
[CALF] Enters the calibration mode. See {4. Calibration}
[5] [GROSS/NET] Switches the display between “gross” and “net” weight.
[9] Works as a numerical key, 9, used for settings.
[6] [PRESET
TARE]
Selects the “preset tare” weight.
[7] [ON/OFF]
•
Turns ON and OFF the display in the normal mode.
•
In the OFF mode, display and external I/Os are all off with the “O” mark on
the display.
•
Available during operation.
(Press the key more than 0.3 seconds to activate.)
[8] [SET POINT] Selects a set point of the code input by numerical keys.
[9] [FUNC.]
Enters the function setting mode. See {5-2. Function Settings}.
(Press the key more than 0.3 seconds to activate.)
[6] Works as a numerical key, 6, used for settings.
[ZERO BAND] Selects the “zero band” weight.
[10]
[RSF]
Enters the setting mode for the OP-03: RS-422/485, OP-04: RS-232C.
See {8-3 OP-03:RS-422/485, OP-04:RS-232C})