Functions and setup of the contrAA 600
contrAA 600
Edition 01/2014
33
The AS-GF is hung in the adapters provided in the sample chamber and electrically con-
nected to the contrAA 600. The device parameters of the AS-GF are set with the ASpect CS
control software.
5.4.2
Solid sampler SSA 600 and SSA 6z
The solid samplers SSA 600 and SSA 6z are absolute preconditions for the solids analysis in
the graphite tube technique. These enable reproducible placement of the IC sample carrier
mounted with the solid sample into the graphite tube.
The solid autosampler SSA 600 enables automatic transport of solid samples into the
graphite tube furnace. Weighing is performed fully automatically with an integrated
microbalance. The solid autosampler SSA 600 has 84 sample positions when using two
sample plates.
The SSA 6z is conceived for manual operation and requires an external balance. The
sample mass must be transferred manually to the sample table.
A full description of the solid autosamplers can be found in the operating instructions "Solid
Autosampler SSA 600" or "Solid Autosampler SSA 6z".
SSA 600 with liquid dispensing
SSA 6z for manual sample supply
Fig. 15
Solid sampler
