Analogue Solutions NYBORG 12, Руководство пользователя

Страница: 9 / 40

Analogue Solutions | Nyborg | Manual
Amplifier
The VCA can be controlled from Gate or Envelope. It can be set to BYPASS so it is always
‘open’. This allows Nyborg to be used as an effects processor. Finally there is a CYCLE
op)on. This sets the envelope to be constantly re-triggered by the LFO allowing for
hands-off sound effects.
Envelopes
There are two EGs – each having control over ATTACK, SUSTAIN, and combined DECAY/
RELEASE.
Modulation
Great thought has been placed into modula)on route choices, allowing a wide range of
sounds to be produced, including percussion and ‘modular’ style sounds.
MIDI
MIDI is inten)onally kept simple – so you can concentrate on making new sounds and
making music – not ge^ng )ed up with SYSEX programming.
You get the all important control over filter cut-off using MIDI Velocity (or a MIDI
controller).
External CV Control Sockets
Nyborg can be controlled via an external analogue sequencer, such as Oberkorn, using
the top panel CV sockets.
There are pitch CV sockets for each VCO PITCH1 and PITCH2, filter CUTOFF, GATE (to
trigger the EGs), EXT (to feed an external CV to various circuits).
Also, on the rear panel are two spare 6.35mm big jack sockets. Using these you can
route external audio through the filter. Set the VCA to BYPASS and use Nyborg as an
effects processor!
Nyborg - Nov 2017
| Page ! 9