Analogue Solutions NYBORG 12, Руководство пользователя

Страница: 37 / 40

Analogue Solutions | Nyborg | Manual
No Signal?
Check the following…
•
Your mixing desk / monitoring equipment is on and working correctly.
•
Check the synth is switched on and that the power adaptor is functioning
correctly.
•
Check it is connected to your monitoring equipment correctly and that the cable
is not faulty.
•
Ensure the output volume is high enough.
•
Ensure the mixer level controls are turned to some sound source like the
VCOs or Noise.
•
Certain extreme filter settings may filter out all of the signal or produce low level
signals. Try adjusting the filter cut-off.
•
Certain extreme PW/PWM settings may cause the pulse outputs to cut-out. Try
adjusting PW/PWM as necessary.
•
Try putting the VCA to BYPASS to hear the raw sound, but if you are using a
MIDI keyboard to trigger the envelopes and VCA, ensure correct MIDI connection, and
that the correct channels have been selected.
Nyborg - Nov 2017
| Page ! 37