Analogue Solutions NYBORG 12, Руководство пользователя

Страница: 23 / 40

Analogue Solutions | Nyborg | Manual
LFO
The Low Frequency Oscillator (LFO) is
basically identical to a VCO, it is another
oscillator, except that it produces periodic
wave forms of low frequency, typically sub-
audio.
These slow cyclic waveforms are used for
modulating other circuit parameters, for
example, for sweeping the filter cut-off up
and down, either slowly for a nice sweep,
or faster for a 'wah-wah' type effect. It could
be used to modulate the VCO pitch for
vibrato.
The LFO block is grouped together with the VCOs as an LFO is an oscillator just like
the VCOs are.
SPEED
This sets the frequency (speed) of the LFO which is indicated by the LED.
MODE – ROTARY SWITCH
This sets the modulation source that is routed to LFO points for modulation selection.
The options are:
LFO Square Wave CV2 (Midi Control) LFO Triangle Wave S&H (Sample & Hold)
Sample and Hold (S+H) on this synth means a modulation signal is created that has a
new random signal level each time the LFO completes a cycle (each time the LFO LED
lights up a new modulation level is set).
Nyborg - Nov 2017
| Page ! 23