Analogue Solutions NYBORG 12, Руководство пользователя

Страница: 17 / 40

Analogue Solutions | Nyborg | Manual
Audio Mixer
NOISE GENERATOR
The noise generator produces white noise which contains all audible frequencies at
equal volume. This is like the hiss you hear between radio stations. The signal is
available for filtering via the Noise/Sub mixer control. Noise would be used for sound
effects such as breath, wind, percussion, etc.
SUB OSC A sub oscillator is a signal taken from a VCO that is then taken down one or
more octaves below the source VCO. In this case the Sub is taken from VCO1, and is
one octave lower. Sub Osc is used typically for creating deeper and more powerful
bass sounds. The Sub Osc waveform is a square wave.
MIXER
The mixer is used to bring various audio source signals together for filtering. There are
3 mixer controls.
SAW/PULSE VCO1 LEVEL
Turning the control clockwise in increasing amounts sends VCO1s pulse signal to the
mixer. Turning the control anti-clockwise in increasing amounts sends VCO1s sawtooth
wave signal to the mixer. In a central position no signal is sent from VCO1 to the mixer.
SAW/PULSE VCO2 LEVEL
Turning the control clockwise in increasing amounts sends VCO2s pulse wave signal to
the mixer. Turning the control anti-clockwise in increasing amounts sends VCO2s
sawtooth wave signal to the mixer. In a central position no signal is sent from VCO2 to
the mixer.
NOISE / SUB LEVEL
Turning the control clockwise in increasing amounts sends the Sub Osc signal to the
mixer. Turning the control anti-clockwise in increasing amounts sends white Noise to
the mixer. In a central position no signal is sent from the Noise generator or Sub Osc to
the mixer.
Nyborg - Nov 2017
| Page ! 17