Analogue Solutions NYBORG 12, Руководство пользователя

Страница: 8 / 40

Analogue Solutions | Nyborg | Manual
MIDI (DAW Use) or CV & Gate?
This unit can be used with a MIDI keyboard (or DAW, or sequencer) or
you can use it with an analogue sequencer, such as Oberkorn.
It can also be used by MIDI and CV at the same )me! So you could
have an analogue step sequencer such as Oberkorn playing a ligle
melody, then using a MIDI keyboard (or MIDI sequencer) transpose the
Oberkorn sequence.
Circuits Included
Oscillators
There are two VCOs – each providing a wealth of features and modula)on choices.
Controls include: TUNE, OCTAVE, MODULATION depth and des)na)on, MOD. SOURCE
(EGs, VCO audio, External CV, LFO), manual pulse WIDTH, VCO Sync
Low Frequency Oscillator
The LFO has triangle and Square wave modula)on signals. The MODE switch can also
be used to route Sample And Hold or CV2 (velocity) signals to the VCF and VCOs.
Filter
Nyborg12 uses a 2 pole 12bB per octave mul)mode filter. What does this mean? It uses
the same filter as the legendary Telemark synth, which is similar (but not the same,
having its own character) to the old Oberheim SEM. The filter is actually four types in
one. Low pass, Band pass, High pass and Notch filters.
Controls include: CUTOFF, RESONANCE, MODULATION depth (- and +), MOS.SOURCE
(EG, LFO, VCO audio, External CV), KEY voltage, CV2 voltage (velocity), NOTCH high/low,
FILTER TYPE (high, low, band, notch).
Nyborg24 uses a 4 pole 24dB ladder low pass filter. It uses the same filter as the
awesome Leipzig synthesizer, which is similar (but not the same, having its own
character) to the old vintage Moogs.
Mixer
Audio choices are the Saw or Square wave of each VCO, Noise or, for added fatness,
Sub-Oscillator.
Nyborg - Nov 2017
| Page ! 8