Analog Devices ADAV4601, Документ по проектированию системы

Страница: 57 / 112

ADAV4601 System Design Document Confidential Information
Rev.1 August 2009 Analog Devices Page 57
Path Information
Figure 50: Path section on GUI
Linked SigmaStudio path
Path where the SigmaStudio master project is. Please note that when importing, a local copy of this folder is
created. If any change is done in the master project, the Application Layer GUI will detect it.
Flow path
Path where the Application Layer GUI project files are saved.
Register Tools
There are the three basic operations that the user can do to create and manipulate the custom audio flow registers.
Figure 51: Register Tools
Add Cell to a Register
This is the basic function to add a cell to a register. Select the cell to be added, and the destination register. This
function will call the associated Wizard, depending on the detected
cell_type . The destination register can be either
a new register, or one previously created.
Figure 52: Creating a new register
When a cell is added to a
new_register , the software will request a Register Name (name in the register map), and an
Input Name (input name that will control the SigmaStudio cell). Input names will always be fields inside the register,
where the maximum size is 16 bits per register. By default, the new register number will be the lowest available, and
it's assigned automatically. It can be changed, see the Edit Register section for more information about the registers
structure, see Application Layer Register Structure section.
1) Select the cell to be used
in a register
2) Select a destination register.
Use “new_register" when
starting a new register.
3) Click Add Cell