August 2012
L010796
15
The SMC60WIN software is a handy utility that supports Anaheim Automation’s line of DPE25611’s
step motor controllers. Connecting your PC to the DPE25611, via a serial cable, the SMC60WIN
software can easily perform the following tasks:
•
Exercise and monitor the DPE25611 controller
•
Write and edit stored programs for standalone operation
•
Directly communicate with the DPE25611 controller
Section 4: SMC60WIN Software
Installation
Software
•
The SMC60WIN is supplied on a CD, containing the setup program and the SMC60WIN
software, DPE25611 manual and sample programs.
•
SMC60WIN software is compatible with all versions of Windows including Windows
2000, Windows XP, Vista, and Windows 7.
Windows 95/98/NT/ME/2000/XP Installation
Option 1
1. Insert the CD into the drive
2. From the Program Manager select
Start │
Run
3. Enter
D:\setup
and click
OK
- use the appropriate drive letter (i.e.
D
or
E
)
Option 2
1. Open Windows Explorer
2. Open CD Drive Folder (D: or E:)
3. Double Click the setup Icon
Getting Started
1. Double click on the SMC60WIN icon to run the SMC60WIN software.
2. Apply power to the DPE25611 controller.
3. Set the appropriate communication setting by selecting Setup
│
Com Port Settings
from the menu bar. (Ctrl+M is a shortcut)
4. Set the appropriate axis setting by selecting Setup
│
Axis from the menu bar. (Ctrl+A
is a shortcut)
5. Establish communications with the DPE25611 by clicking on the Connect Icon, or select
Setup
│
Connect from the menu bar. If the unit is connected properly, the program will
notify you when communication has been established. (Ctrl+C is a shortcut)
Changing the COM Port Number of the USB port
1. From
DeviceManage,
select
“View devices by type”
, then
“Port (COM & LPT)”
.
Select the USB serial port and click Properties. Select the
“Port Settings”
tab, then
click
Advanced
.
2. Choose the required COM port number from the list and click
OK
.
July 2018
