DXLink Fiber Specifications
33
Instruction Manual – DXLink Fiber Transmitters and Receivers
*
Connectivity between products requires matching transceiver types, MM to MM and SM to SM.
Note:
Duplex boards/units support bidirectional control over fiber. Simplex boards/units do not support EDID
transfer and control transport (such as Ethernet, USB, IR, and Serial Control) over fiber; although when used
as part of a complete Enova DGX solution, control can be provided if a supplemental independent network
connection is used. For details, see the “Instruction Manual - Enova DGX 8/16/32/64 Digital Media Switchers.”
AMX reserves the right to modify its products and their specifications without notice.
General Specifications (continued)
Single Mode Optical Budget
• 7.4 dB (typical) between DXLink Fiber Transceivers
• Optical Modulation Amplitude (OMA): -5.2 dBm (min.)
• Optical Modulation Amplitude (OMA) sensitivity: -12.6 dBm (typical)
Single Mode Optical Transceiver
Mean Output Power
-8.2 dBm to 0.5 dBm (average power)
Multimode Optical Budget
• 6.8 dB (typical) between DXLink Fiber Transceivers
• Optical Modulation Amplitude (OMA): -4.3 dBm (min.)
• Optical Modulation Amplitude (OMA) sensitivity: -11.1 dBm (typical),
Multimode Optical Transceiver
Mean Output Power
-1 dBm (average power)
Noise Level
0 dBA @1m (typical), 45.3 dBA @ 1m (max)
Airflow
Convection (openings on top of case, typical); forced air (out of front plate, when
fan is active).
Approvals
UL 60950-1, CSA 60950-1, IEC 60950-1, CE EN 60950-1, CE EN 55022
Class A, CE EN 55024, FCC CFR Title 47 Part 15 Subpart B Class A, ICES-003
Class A, RoHS, WEEE
Other AMX Equipment
AMX Products Compatible with
DXLink Fiber Transmitters*
Enova DGX Digital Media Switchers
AMX Products Compatible with
DXLink Fiber Receivers*
Enova DGX Digital Media Switchers
Included Accessories
• Desktop power supply (ENERGY STAR
®
qualified): 1 per unit
Caution:
Only the provided desktop power supply should be used, and it
must not be altered in any way.
Compatible / Optional Equipment
• CC-NIRC, NetLinx Emitter Cable (FG10-000-11)
• IR03, External IR Receiver Module (FG-IR03)
• CC-MINIUSB, Mini USB to PC cable adapter (FG5967-20): use with DXLink
Fiber RX only – for connecting a keyboard/mouse device
• CC-USB, USB programming cable (FG10-5965): use with DXLink Fiber TX
only – for connecting to a PC
NetLinx and Control Specifications
ICS LAN / Ethernet Port
• TCP/IP port (ICS LAN 10/100)
• RJ-45 connector
Serial Port
• Bidirectional RS-232
• Standard NetLinx baud rate 1200 to 115k
• Parity support: Odd/Even/None
• 3.5 mm pluggable Phoenix terminal block
IR Control Port
• Port for use with IR03 External IR Receiver (optional accessory FG-IR03)
• Port for use with CC-NIRC NetLinx Emitter (optional accessory FG10-000-11)
Advanced Configuration Interface
USB mini-B connector (Program port)
ID Pushbutton
• Toggle between DHCP and static IP addressing
• Places system in NetLinx Device ID assignment mode
• Reset the factory default settings
• Restore the factory firmware image
