![background image](http://html1.mh-extra.com/html/amx/dcp-mtx/dcp-mtx_user-manual_2939027013.webp)
13
USER MANUAL
DCP-MTX
Group C contains DCP-MTX x, DCP-MTX y and DCP-MTX z. If DCP-MTX y is MYTURN
activated, Display y and z will show its active signal, and Display 1 will not.
For more information about setting up Group Mode, please go to “Daisy-Chain
Grouping” under “8.2.2.2 Configuration” .
Group Mode Connection
HDBaseT
DCP-MTX 1
DCP-MTX 2
DCP-MTX x
DCP-MTX y
SOURCE 1
SOURCE 2
DCP-MTX 3
SOURCE 3
DISPLAY x
DISPLAY y
HDBaseT
HDBaseT
HDBaseT
HDBaseT
DCP-MTX z
DISPLAY z
HDBaseT
DISPLAY 1
DISPLAY 2
DISPLAY 3
SOURCE x
SOURCE y
Group A
Group B
Group C
6.2 Installation & Connection
To create a Chain- or Ring-type connection containing multiple DCP-MTXs, sources and
displays, please refer to the instructions below and the “SYSTEM WIRING” chart:
1. Connect DCP-MTXs through HDBT:
1) Connect HDBT OUT of the first DCP-MTX to HDBT IN of the next (e.g. DCP-
MTX 1 to DCP-MTX 2);
2) Connect the rest DCP-MTXs through HDBT likewise.
3) If Ring Mode connection is required, connect HDBT OUT of the last DCP-MTX
to HDBT IN of the first DCP-MTX (e.g. DCP-MTX N to DCP-MTX 1).
2. Set up IP Sequencing for all the DCP-MTXs.
• Option A: Using the MYTURN button of the first DCP-MTX (e.g. DCP-MTX 1)
a) Long press the MYTURN button of DCP-MTX 1 for 10 seconds;
b) The input LEDs (HDMI IN, DP IN and VGA in) will flash twice, then
DCP-MTX 1 will start IP sequencing automatically and the rest DCP-
MTXs will get its individual IP address according to their sequence in the
connection loop (for instance, if DCP-MTX 1 gets 192.168.1.121 (Default
IP address of DCP-MTXs), then DCP-MTX 2 will get 192.168.1.122.)
• Option B: Using Start Sequence button on Web UI.
a) Connect your PC to ETHERNET port of the first DCP-MTX (e.g. DCP-MTX