![background image](http://html1.mh-extra.com/html/amx/dcp-mtx/dcp-mtx_user-manual_2939027027.webp)
27
USER MANUAL
DCP-MTX
2. Click “OK” to reload the page.
3. Status section will show the updated connection status of the DCP system.
NOTE:
1. In case the quantity keyed in exceeds the actual number of DCP devices, the
surplus devices will be in RED gradient in the Status section.
Example: if there is only one DCP-MTX connected, and the Daisy-chain Quantity is
keyed in 3, the above connection status will appear after reloading.
2. If any DCP-MTX or DCP device is reset, removed from or added to the connection,
please repeat the above steps to reset IP sequencing to avoid IP conflicts among
connected devices.
4) Daisy-Chain Grouping
The Daisy-Chain Grouping section is for you to create small groups and is realized by
switching on the Daisy Chain Grouping button and stopping signal from transmitting to
downstream DCP devices.
Example:
To create Group A (DCP-MTX 1 only) and Group B (DCP-MTX 3-5) in a Ring Mode