![background image](http://html1.mh-extra.com/html/amx/dcp-mtx/dcp-mtx_user-manual_2939027039.webp)
39
USER MANUAL
DCP-MTX
8.3 TELNET
DCP-MTX can also be controlled by Telnet, a protocol that enables you to connected a
remote or local computer with DCP-MTX over a TCP/IP network.
Before controlling or setting up DCP-MTX through Telnet, please ensure the Telnet
connection between the controlling device (e.g. PC) and DCP-MTX has been configured
correctely.
For Telnet control, the two network parameters of DCP-MTX are required:
• IP Address: DCP-MTX comes with a default IP address of 192.168.1.121 and may
be changed after IP sequencing. Please use the one after IP sequencing for Telnet
control.
• Port: DCP-MTX's fixed port number is 23.
For complete list of controlling commands, please refer to ”APPENDIX: COMMAND
SET“.