25
USER MANUAL
DCP-MTX
8.2.2.1 Status
The Status section shows the current status of DCP-MTX and/or other DCP devices
connected. Each DCP device, including DCP-MTX, uses different gradient colors to
indicate its status.
• Yellow gradient: The DCP device is working in ID Mode (ID button under
“Configuration > Device” is turned on, and its ID LED flashes).
• Green gradient: The DCP device is successfully connected but not in ID Mode.
• Red gradient: The DCP device is not connected.
Moving your mouse up onto a DCP device, informaiton of the device will be displayed
in a pop-up window. DCP-MTX will show such information as Name, IP Address,
Sequence, Grouping, Select (input source signal).
A click of DCP-MTX will pop up the following window, which allow you to verify and
switch for desired input signal for the selected DCP-MTX.
8.2.2.2 Configuration
The Configuration section includes Device, Video and Control and allows you to set up
the DCP-MTX, input source signal and control methods.
Device
The Device sub-menu is used to perform the following functions:
• ID