28
USER MANUAL
DCP-MTX
connection as below.
Group A
DCP-MTX 1
DCP-MTX 2
DCP-MTX 3
DCP-MTX 4
DCP-MTX 5
DCP-MTX 6
DCP-MTX z
Group B
Group A: Switch on Daisy-Chain Grouping button of both DCP-MTX z & DCP-MTX 1.
Group B: Switch on Daisy Chain Grouping button of both DCP-MTX 2 & DCP-MTX 5.
In addition, successful formation of Group A and Group B also makes DCP-MTX 2 and
DCP-MTX 6-z two separate groups.
5) MYTUN Sort Protection
The MYTURN Sort Protection is to enable or disable IP sequencing through MYTURN
button.
When the button is switch ON, users will not be able to trigger IP sequencing using the
MYTURN button on the front panel and will help reduce maloperation of the MYTURN
button.
NOTE:
It’s highly recommended to switch the MYTURN Sort Protection button ON after setting
up the DCP-MTX or the system.
6) Network
The Network section allows you to set up the IP mode of the DCP-MTX to either Static
or DHCP.
By default, DCP-MTX is shipping in Static mode, with default IP address of
192.168.1.121, Netmask of 255.255.0.0 and Gateway of 192.168.1.1.