Introducing Your New N3000 Series Devices
7
N3000 Series User Manual
HDMI Series (with SFP, HDMI, and USB)
SVSI’s H.264 Compressed AV over IP HDMI Series includes the N3132 Encoder and the N3232 Decoder. This series differs from the
DVI version in the following ways:
1G SFP port (modules for port sold separately)
HDMI ports
USB port (for recording on the Encoder)
Refer to the following figures (front and rear panel drawings of these devices) and the
Front and Rear Panel Descriptions table
on
page 7 for more details.
FIG. 4
Front Panel (N3132/N3232)
FIG. 5
N3132 Encoder Rear Panel
FIG. 6
N3232 Decoder Rear Panel
1
2
3
4
1) USB Standard-A Port for recording on Encoders
2) Device Reset Button
3) Device ID Discovery Button
4) Power/Status Indicators
10
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
5) IR Emitter Connection
6) RS232 Connection
7) Analog Audio Input
8) Passthru HDMI Video
9) HDMI Video Input
10) DB-15 Analog Input
1
2
3
8
7
6
5
4
9
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
5) IR Emitter Connection
6) RS232 Connection
7) Analog Audio Output
8) HDMI Video Output
1
2
3
8
7
6
5
4
Front and Rear Panel Descriptions
Front Panel
USB Standard-A port
Use this port to plug in a flash drive (or any other drive that can be recorded to) for recording on the
Encoder (N3132 only).
RESET button
Recessed pushbutton. Press to initiate a “warm restart” which causes the processor to reset, but not lose
power. A reset does NOT affect the current settings.
