Decoder Configuration Options
60
N3000 Series User Manual
N-Act Page
Click the
N-Act
link at the top of any of the main web pages to access the page shown in
Figure 53
. This page allows you to create
command lists which are performed automatically by the unit based on power or video connection (without the use of an outside
controller). For example, you can tell a projector and lights to come on when the Decoder powers up. You can add multiple
commands for each event. See
Table 26
for option descriptions.
FIG. 53
N-Act Page
TABLE 26
N-Act Page Options
Option
Description
Enable N-Act Events
Enable to activate the configured events.
Power on Event
Create/delete/test events to be performed when the Decoder powers on. Visit our website for more details on
Application Programming Interface (API) commands.
Video Cable Connected
Event
Create/delete/test events to be performed when the Decoder is connected to an output display. The
Trigger
Delay
field specifies how long (in milliseconds) the device has to be connected for the command to be executed.
Video Cable
Disconnected Event
Create/delete/test events to be performed when the Decoder is disconnected from the output display. The
Trigger Delay
field specifies how long (in milliseconds) the device has to be disconnected for the command to
be executed. This keeps accidental (momentary) disconnects from triggering the command sequence.
Save Events
Click to save changes made to this page.
Import/Export
Use this section of the page to import/export N-Act event configurations so you can share them from one unit
to another.
