Decoder Configuration Options
52
N3000 Series User Manual
Advanced Settings
The section of the
Settings
page shown in
Figure 44
is displayed when you click the
Advanced Settings
link. Options are described
in
Table 18
.
FIG. 44
Advanced Settings
TABLE 18
Settings Page: Advanced Settings
Option
Description
Notes
Add latency (ms)
Enter number of milliseconds to add to latency.
Increase this number if you are having video or audio
drop issues. A higher latency increases the tolerance
to jitter in the stream timing.
Input audio for
LocalPlay
Select to enable the input audio when the Live/Local
menu is set to one of the local images.
In order to get input audio for LocalPlay:
On the Encoder’s
Settings
page, enable
PCM
audio.
On the Decoder’s
Settings
page, disable
Audio
Follows Video
and set the
Audio Stream
to the
Encoder (or audio source).
YCbCr 4:2:2 Output
Set YCbCr output to be disabled, enabled, or selected
automatically based on the connected display.
Simplified DVI/HDMI
Detect
Select to enable the detection of a display device using
a simple line level check.
Last Frame Hold
Select to cause the Decoder to continue playing the last
valid video frame if the network connection is lost.
When enabled, Local Play will not appear.
DVI/HDMI off on stream
loss
Select to disable the video output drive when the video
stream is not available.
DVI/HDMI Enable
Select to enable output video.
