Encoder Configuration Options
36
N3000 Series User Manual
Change Password Section
The
Change
Password
section of the settings page is shown in
Figure 29
. To change the N3000 Encoder interface password (for
admin-level access) enter the current password in the field labeled
Old Password
, and enter a new password in the
New
Password
and
Confirm
Password
fields. Click
Change PW
to accept the new password. To create/change the user password (which provides
access to the
Record
page of the N3132) use the
Change User Password
field and button at the bottom portion of this section.
FIG. 29
Change Password
NOTE:
The admin password needs to match N-Able's stored password to allow auto-login using N-Able.
Software Section
The
Software
section of the
Settings
page is shown in
Figure 30
. Options are described in
Table 8
.
FIG. 30
Software Section
TABLE 8
Settings Page: Software Section
Option
Description
Serial
Displays the serial number of the N3000 Encoder.
MAC Address
Displays the MAC address of the network interface of the N3000 Encoder.
Firmware Version
Displays the date code for the currently running version of the N3000 Encoder internal firmware.
Web Version
Displays the date code for the currently running version of the web interface.
Factory Restore
Click to restore the device to the original factory settings. This resets everything except the IP address
(including name, stream number, serial settings, etc.). If you wish to factory restore all settings (including the IP
address) boot the box with the ID button held down.
Reboot
Click to reboot the device (does not affect current configuration).
